Product Description
Product Description
3015 single table laser cutting machine has a small overall footprint and high cost performance. As an economical and practical laser cutting machine, it can be used by the majority of medium and thin plate customers who pursue quality and have limited budgets.
Features:
– A single cutting platform, the overall equipment is compact.
– The operation panel and the electric control are integrated into 1 design, independent of the cutting table, and the operation is more convenient.
– A variety of cutting formats are available to meet the blanking requirements of different sizes of plates.
Detailed Photos
Product Parameters
Technical Parameters
| Laser power | 1000-2000W | ||
| Model | DPX-D3015 | DPX-D4571 | DPX-D6571 |
| Cutting range | 3000 × 1500mm | 4000 × 2000mm | 6000 × 2500mm |
| Cutting and focusing method | Manual / automatic focusing | ||
| Machine running accuracy | Acceleration: 1.0G | ||
| Maximum speed: 80m/min | |||
| Axial positioning accuracy of worktable: ± 0.05mm/m | |||
| Repeated positioning accuracy of worktable: ± 0.03mm/m | |||
| Laser power | 3000-6000W | |||
| Model | DPX-D3015 | DPX-D4571 | DPX-D6571 | DPX-D8571 |
| Cutting range | 3000 × 1500mm | 4000 × 2000mm | 6000 × 2500mm | 8000 × 2500mm |
| Cutting and focusing method | Auto focus | |||
| Machine running accuracy | Acceleration: 1.2G | |||
| Maximum speed: 100m/min | ||||
| Axial positioning accuracy of worktable: ± 0.05mm/m | ||||
| Repeated positioning accuracy of worktable: ± 0.03mm/m | ||||
| Laser power | 12000-30000W | |||
| Model | DPX-D6571 | DPX-D8571 | DPX-D10571 | DPX-D12571 |
| Cutting range | 6000 × 2500mm | 8000 × 2500mm | 10000 × 2500mm | 12000 × 2500mm |
| Cutting focus method | Auto focus | |||
| Machine running accuracy | Acceleration: 1.8G | |||
| Maximum speed: 150m/min | ||||
| Axial positioning accuracy of worktable: ± 0.05mm/m | ||||
| Repeated positioning accuracy of worktable: ± 0.03mm/m | ||||
Cutting Performance
| Material | 1000W cutting performance | 1500W cutting performance | 2000W cutting performance | |||
| Carbon steel | stable cutting | ≤ 8mm | stable cutting | ≤ 12mm | stable cutting | ≤ 16mm |
| Limit cut | 12mm | Limit cut | 16mm | Limit cut | 20mm | |
| Stainless steel | stable cutting | ≤ 4mm | stable cutting | ≤ 6mm | stable cutting | ≤ 7mm |
| Limit cut | 6mm | Limit cut | 8mm | Limit cut | 10mm | |
| Material | 3000W cutting performance | 4000W cutting performance | 6000W cutting performance | |||
| Carbon steel | stable cutting | ≤ 20mm | stable cutting | ≤ 22mm | stable cutting | ≤ 25mm |
| Limit cut | 25mm | Limit cut | 25mm | Limit cut | 30mm | |
| Stainless steel | stable cutting | ≤ 9mm | stable cutting | ≤ 10mm | stable cutting | ≤ 14mm |
| Limit cut | 12mm | Limit cut | 14mm | Limit cut | 20mm | |
| material | 12000W cutting performance | 15000W cutting performance | 20000W cutting performance | |||
| carbon steel | stable cutting | ≤ 35mm | stable cutting | ≤ 40mm | stable cutting | ≤ 45mm |
| Limit cut | 50mm | Limit cut | 60mm | Limit cut | 70mm | |
| Stainless steel | stable cutting | ≤ 30mm | stable cutting | ≤ 35mm | stable cutting | ≤ 40mm |
| Limit cut | 50mm | Limit cut | 70mm | Limit cut | 80mm | |
Application
Certifications
Our Advantages
After Sales Service
1. 7*24 hour
2. Response time<12 hours
3.Online support
4.Product replacement
5. Customer field service
6. Backup products during repairing for long time cooperators
* International warranty ONLY valid if products are purchased directly from Horizon Laser or authorized local distributors/agents.
FAQ
1. What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
2. What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
3. Do you guarantee safe and secure delivery of products?
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Online Service |
|---|---|
| Warranty: | Online Service |
| Application: | Home Appliance, Environmental Equipment, Petroleum Machinery Manufacturing, Agriculture Machinery, Food Machinery, Automotive Industry, Shoemaking Industry |
| Cooling System: | Water Cooling |
| Technical Class: | Continuous Wave Laser |
| Applicable Material: | Metal |
| Customization: |
Available
|
|
|---|
How do I clean and maintain aluminum tables to keep them looking new?
To keep aluminum tables looking new, it is important to clean and maintain them properly. Here is a detailed explanation:
1. Regular Dusting: Start by regularly dusting the surface of the aluminum table using a soft cloth or a feather duster. This helps remove loose dirt, dust, and debris that may accumulate over time.
2. Gentle Cleaning Solution: For general cleaning, create a mild cleaning solution by mixing warm water with a small amount of gentle dish soap or a non-abrasive household cleaner. Avoid using harsh chemicals or abrasive cleaners, as they can damage the aluminum finish.
3. Spot Cleaning: If there are specific stains or spots on the table, you can apply the cleaning solution directly to the affected area. Gently scrub the stain with a soft cloth or a non-abrasive sponge. Rinse the area thoroughly with clean water to remove any residue.
4. Full Surface Cleaning: For a thorough cleaning of the entire table surface, dip a soft cloth or sponge into the cleaning solution and wipe down the aluminum table. Pay attention to all sides of the table, including the legs and any intricate details. Ensure that the cloth or sponge is damp, not soaking wet, to prevent excess water from pooling on the surface.
5. Rinse: After cleaning, rinse the table thoroughly with clean water to remove any remaining soap or cleaning solution. This step is important to prevent any residue from drying on the surface and leaving streaks or marks.
6. Drying: To prevent water spots or marks, dry the aluminum table with a clean, soft cloth or allow it to air dry. If there are any remaining water spots, you can use a microfiber cloth to gently buff the surface and remove them.
7. Protective Coating: If desired, you can apply a protective coating or wax specifically designed for aluminum surfaces. This can help enhance the shine and provide an additional layer of protection against the elements. Follow the manufacturer’s instructions for application and reapplication of the protective coating.
8. Avoid Scratches: To prevent scratches or damage to the aluminum table, avoid using abrasive materials, harsh scrub brushes, or abrasive cleaners. Instead, opt for soft cloths, non-abrasive sponges, or gentle cleaning tools.
9. Avoid Direct Heat: Avoid placing hot pots, pans, or dishes directly on the aluminum table surface, as extreme heat can cause damage or discoloration. Use trivets, coasters, or heat-resistant mats to protect the table from heat sources.
10. Storage: If the aluminum table will not be used for an extended period, it is advisable to store it in a clean and dry location. Ensure it is protected from moisture, extreme temperatures, and direct sunlight. If the table is foldable, follow the manufacturer’s instructions to properly fold and store it.
By following these cleaning and maintenance practices, you can keep your aluminum table looking new and prolong its lifespan. Regular cleaning, gentle handling, and protection against harsh elements will help maintain the appearance and functionality of the table over time.
Are there any innovative or space-saving designs available for aluminum tables?
Yes, there are innovative and space-saving designs available for aluminum tables. Here is a detailed explanation:
1. Folding Tables: Folding aluminum tables are a popular choice for those looking to save space. These tables feature collapsible legs or a hinged top that allows them to be easily folded and stored when not in use. Folding tables are compact and can be conveniently stored in small spaces such as closets, garages, or under beds. They are especially useful for outdoor gatherings, picnics, or camping trips where portability and space efficiency are important.
2. Expandable or Extendable Tables: Some aluminum tables come with innovative mechanisms that allow them to expand or extend their surface area. These tables typically have additional leaves or sections that can be inserted or unfolded to increase the table’s size. By incorporating these expandable features, the table can accommodate more people or provide a larger surface area when needed. When not in use, the additional leaves or sections can be removed or folded back, saving space.
3. Nesting Tables: Nesting tables are a clever space-saving solution that consists of multiple tables of different sizes that can be neatly stacked together. Aluminum nesting tables typically feature a set of two or more tables that can be arranged in various configurations. When not in use, the smaller tables can be nested under the larger ones, occupying minimal space. These tables offer versatility, allowing you to use them individually or as a set, depending on your needs.
4. Convertible Tables: Convertible aluminum tables are designed to serve multiple purposes, maximizing functionality while saving space. These tables can be transformed or adjusted to different configurations or forms to accommodate various activities. For example, some convertible tables can convert from a coffee table height to a dining table height, or from a regular table to a bar table. These versatile designs allow you to optimize space while adapting the table to different functions.
5. Built-in Storage: Some innovative aluminum table designs incorporate built-in storage compartments or shelves. These tables provide a dual-purpose solution by offering a functional tabletop surface and additional storage space. The storage compartments can be used to store items such as outdoor accessories, tableware, or even cushions. By integrating storage into the table design, you can reduce clutter and keep your outdoor space organized.
6. Modular Tables: Modular aluminum tables consist of individual components or modules that can be combined or rearranged to create different table configurations. These tables often feature interchangeable parts, allowing you to customize the table size, shape, or layout according to your specific needs. Modular tables are flexible and adaptable, making them suitable for various outdoor spaces and accommodating different seating arrangements.
7. Space-Saving Designs: In addition to specific features, many aluminum table designs focus on space efficiency as a whole. Tables with sleek and slim profiles, minimalist designs, or cleverly integrated features can help save space in outdoor areas. These designs prioritize functionality while reducing the overall footprint of the table, making them suitable for smaller balconies, patios, or decks.
When searching for innovative or space-saving aluminum tables, consider exploring different furniture brands, designers, or retailers that specialize in smart and compact designs. Read product descriptions, customer reviews, and examine images or diagrams to understand the specific features and space-saving capabilities of the tables.
By opting for these innovative and space-saving designs, you can enjoy the functionality and convenience of aluminum tables while maximizing the use of your outdoor space.
How does the durability of aluminum tables compare to other materials?
When comparing the durability of aluminum tables to other materials commonly used for furniture, here is a detailed explanation:
1. Wood: Aluminum tables are generally more durable than tables made of wood. While wood can be sturdy and long-lasting, it is susceptible to issues such as warping, cracking, and rotting when exposed to moisture or fluctuating outdoor conditions. In contrast, aluminum is resistant to these problems and can withstand outdoor elements without deteriorating. Additionally, aluminum is less prone to scratches and stains compared to wood, making it a more durable choice in terms of everyday wear and tear.
2. Wrought Iron: Wrought iron tables are known for their strength and durability. They can withstand heavy use and resist damage from impacts or pressure. However, wrought iron is susceptible to rust and corrosion over time, especially when exposed to moisture or humid environments. In comparison, aluminum is highly resistant to rust and corrosion, making it a more durable material for outdoor tables. Aluminum’s durability also extends to its ability to maintain its structural integrity under various weather conditions without warping or bending.
3. Plastic: Aluminum tables are generally more durable than plastic tables. Plastic tables can be lightweight and affordable, but they are prone to cracking, fading, and discoloration when exposed to prolonged sunlight or extreme temperatures. Plastic can also become brittle over time, leading to reduced durability. On the other hand, aluminum is more resistant to fading, discoloration, and temperature variations, making it a more durable choice for outdoor use.
4. Glass: Aluminum tables tend to be more durable than glass tables. Glass tables can be elegant and visually appealing, but they are more susceptible to breakage and scratches. Glass is also sensitive to temperature changes, and extreme temperature variations can cause it to crack or shatter. In comparison, aluminum tables are less fragile and can withstand impacts better. Aluminum’s durability makes it a safer and more practical choice, especially in high-traffic areas or households with children or pets.
5. Composite Materials: Composite materials, such as fiber-reinforced polymer (FRP) or polywood, offer good durability but may not match the longevity of aluminum tables. While composite materials are designed to be weather-resistant and low-maintenance, they can still be susceptible to fading, warping, or cracking over time. Aluminum tables, with their resistance to rust, corrosion, and fading, can provide a higher level of durability in outdoor settings.
It’s important to note that the durability of any table can also depend on factors such as the quality of materials used, manufacturing techniques, and proper maintenance. However, overall, aluminum tables tend to offer superior durability compared to wood, wrought iron, plastic, glass, and some composite materials, making them a reliable choice for both indoor and outdoor use.
editor by CX 2024-05-09
China Professional New Design CHINAMFG Extrusion Cooling Tables/Handling Tables in CHINAMFG Extrusion Machine with Good quality
Product Description
Product Description
1. Adopt hydraulic lifting run out table, drive high-temperature roller with chain.
2. Run out table uses high temperature roller, reduce wear and tear of rollers due to high temperature.
3. Adopt temperature-resistance felt belt reduce wear and tear ofaluminium profile when transport.
4. Aluminium profile is shift transportation, keep appropriate distance between aluminum profiles.
Product Parameters
Work Shop Environment
Company Profile
HangZhou Yaohua Machinery CHINAMFG Co., LTD., located in China aluminum profile production base ——-Shishan Town,Xihu (West Lake) Dis. District, HangZhou City,GD Province, Where is the Pearl River CHINAMFG area with developed economy and convenient transportation.
Yaohua Enterprise, founded in 2007, is a professional manufacturer of aluminum profile extrusion press auxiliary equipment, with many years of rich experience in the design and production of aluminum extrusion press auxiliary equipment. After years of development and innovation, the company has trained a number of outstanding technical personnel and management team.
It is a comprehensive professional manufacturer that can supply a turn-key project such as complete aluminium profile plant design and equipment manufacturing, installation,commissioning, maintenance and other related guidance according to customer needs.
Yaohua enterprise has advanced production equipment, strong technical force, modern testing means, perfect after-sales service, strict management system, good corporate reputation, products hot sale for all over the country, but also exported to home and abroad, including: Vietnam, Thailand, Malaysia and other Southeast Asian countries, the Middle East, Europe and the United States and other places, and we won good reputation from the clients.
FAQ
Q1: How is the quality of Yaohua Brand machine and the service life?
Yaohua Brand is 1 of the best auxiliary equipment for extrusion manufacturers in China. According to the feedback of old customers, under normal circumstances, the life of the machine can reach 15 years or more.
Q2: What main parts and components are we using ?
Te main component of Yaohua machine, we use famous brands at home and abroad, such as CHINAMFG in China, CHINAMFG in Japan.
Q3. Will Yaohua provide installation service?
we will ensure to simplify all the installation procedures as far as possible, provide the most beneficial after-sales service to customers, so that the machinery smoothly put into production, to maximize the interests of customers.
Q4:What is the delivery time of Yaohua Machines?
The ordinary models will be delivered within 60 days after received the deposit.
Q5: If I want to know more details,what can I do?
We have 24 hours online customer service, welcome to contact. You can also learn more through our official website.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 24 Hours Online Service |
|---|---|
| Warranty: | About 1 Year |
| Condition: | New |
| Certification: | ISO9001 |
| Customized: | Customized |
| Material: | Metal |
| Customization: |
Available
|
|
|---|
Are there eco-friendly or sustainable options for aluminum table production?
Yes, there are eco-friendly and sustainable options for aluminum table production. Here is a detailed explanation:
1. Recycled Aluminum: One of the most sustainable options for aluminum table production is using recycled aluminum. Recycled aluminum is obtained from post-consumer or post-industrial sources and can be melted down and reprocessed to create new aluminum products, including tables. Using recycled aluminum reduces the need for extracting and refining raw materials, conserves energy, and helps minimize waste. Additionally, recycled aluminum maintains the same quality and properties as virgin aluminum, making it a viable and environmentally friendly option for table production.
2. Energy-Efficient Manufacturing: Another aspect of eco-friendly aluminum table production is employing energy-efficient manufacturing processes. Aluminum manufacturers can implement energy-saving technologies, such as using renewable energy sources or optimizing production lines to reduce energy consumption. By minimizing energy use during the manufacturing process, the carbon footprint associated with aluminum table production can be significantly reduced, contributing to overall sustainability efforts.
3. Low Emissions: Sustainable aluminum table production also involves minimizing greenhouse gas emissions. Aluminum manufacturers can adopt practices that reduce or eliminate the release of harmful emissions into the atmosphere. This can be achieved through the use of advanced filtration systems, the proper treatment of waste gases, and the implementation of emission control technologies. By focusing on reducing emissions, the environmental impact of aluminum table production can be mitigated.
4. Water Conservation: Conserving water is another important aspect of eco-friendly aluminum table production. Manufacturers can implement water recycling and reuse systems, as well as employ water-efficient processes to minimize water consumption during production. Additionally, responsible wastewater management practices can be implemented to ensure that any water discharged from the manufacturing process is properly treated to minimize environmental impact.
5. Life Cycle Assessment: Conducting a life cycle assessment (LCA) is a valuable tool for evaluating the environmental impact of aluminum table production. An LCA considers the entire life cycle of a product, from raw material extraction to manufacturing, use, and end-of-life disposal or recycling. By analyzing the various stages of production and identifying areas for improvement, manufacturers can make informed decisions to minimize the environmental footprint of aluminum tables throughout their life cycle.
6. Certifications and Standards: Various certifications and standards exist to recognize and promote sustainable practices in aluminum production. For example, the Aluminum Stewardship Initiative (ASI) provides a certification program that ensures responsible production, sourcing, and stewardship of aluminum. By choosing aluminum tables from manufacturers with recognized certifications or adherence to sustainable standards, consumers can support environmentally conscious production practices.
7. End-of-Life Recycling: Considering the end-of-life phase is crucial for sustainable aluminum table production. Aluminum is highly recyclable, and at the end of their life cycle, aluminum tables can be recycled to produce new aluminum products. Recycling aluminum requires significantly less energy compared to primary production, resulting in reduced energy consumption and greenhouse gas emissions. Encouraging proper recycling and creating infrastructure to facilitate the recycling of aluminum tables promotes a closed-loop system and minimizes waste.
By incorporating these eco-friendly and sustainable practices, aluminum table production can align with environmental goals and contribute to a more sustainable future. Consumers can support these efforts by choosing aluminum tables that are produced using recycled aluminum, manufactured with energy-efficient processes, and certified by recognized sustainability standards.
How do aluminum tables enhance the overall functionality of outdoor spaces?
Aluminum tables offer several advantages that enhance the overall functionality of outdoor spaces. Here is a detailed explanation:
1. Durability: Aluminum tables are known for their durability and ability to withstand outdoor elements. They are resistant to rust, corrosion, and fading, making them ideal for long-term use in various weather conditions. Their robust construction ensures that they can withstand the rigors of outdoor environments, including exposure to sunlight, rain, and temperature changes.
2. Lightweight and Portable: One of the key advantages of aluminum tables is their lightweight nature. Compared to other materials like wood or wrought iron, aluminum tables are easier to move and transport. This portability allows you to rearrange your outdoor space easily or take the table with you for picnics, camping trips, or other outdoor activities.
3. Versatility: Aluminum tables come in various shapes, sizes, and designs, offering versatility in outdoor spaces. Whether you have a small balcony, a spacious patio, or a garden, you can find aluminum tables that fit your specific needs. They can be used as dining tables, coffee tables, side tables, or even as workstations. This versatility allows you to create functional and inviting seating areas for different purposes.
4. Low Maintenance: Aluminum tables require minimal maintenance, making them convenient for outdoor spaces. Unlike wood tables that may require regular staining or sealing, aluminum tables can be easily cleaned with mild soap and water. They are resistant to stains, mold, and mildew, reducing the need for extensive upkeep. This low-maintenance characteristic allows you to spend more time enjoying your outdoor space rather than maintaining furniture.
5. Design Variety: Aluminum tables are available in a wide range of designs, styles, and finishes, allowing you to find options that complement your outdoor aesthetic. Whether you prefer a modern, contemporary look or a more traditional and rustic style, there are aluminum tables to suit your preferences. You can choose from different colors, textures, and patterns to create a cohesive and visually appealing outdoor space.
6. Space Optimization: Aluminum tables can help optimize outdoor spaces by providing functional surfaces for various activities. They offer a place to dine, entertain guests, work, play games, or simply relax. By incorporating aluminum tables into your outdoor design, you can maximize the usability of your outdoor space and create distinct areas for different purposes.
7. Weather Resistance: Aluminum tables are designed to withstand outdoor weather conditions. They are resistant to UV rays, which helps prevent fading or discoloration over time. Aluminum is also resistant to moisture, making it suitable for use in humid or rainy climates. These weather-resistant properties ensure that your aluminum table remains in good condition and maintains its functionality for years to come.
8. Cost-Effective: Aluminum tables generally offer good value for money. They are often more affordable compared to other outdoor furniture materials like teak or wrought iron. Despite their lower cost, aluminum tables still provide durability and functionality, making them a cost-effective choice for enhancing outdoor spaces.
By incorporating aluminum tables into your outdoor spaces, you can enjoy their durability, versatility, ease of maintenance, and aesthetic appeal. These tables provide functional surfaces for various activities and help optimize the usability of your outdoor area, ultimately enhancing the overall functionality and enjoyment of your outdoor space.
Are there specific types of aluminum alloys used in manufacturing tables?
Yes, specific types of aluminum alloys are commonly used in the manufacturing of tables. Here is a detailed explanation:
1. Aluminum 6061: Aluminum alloy 6061 is one of the most popular choices for manufacturing tables. It is a versatile alloy that offers a good balance of strength, durability, and workability. Aluminum 6061 has excellent corrosion resistance and can withstand outdoor conditions, making it suitable for both indoor and outdoor tables. This alloy is often used in the construction of lightweight and sturdy tables, including dining tables, outdoor patio tables, and folding tables.
2. Aluminum 5052: Aluminum alloy 5052 is another commonly used alloy in table manufacturing. It is known for its high strength and excellent corrosion resistance. Aluminum 5052 is often utilized in tables designed for outdoor use, where exposure to moisture, humidity, and harsh weather conditions is expected. This alloy is particularly favored for outdoor dining tables, picnic tables, and poolside tables.
3. Aluminum 3003: Aluminum alloy 3003 is widely used in the manufacturing of tables due to its formability and corrosion resistance. It is a non-heat treatable alloy that offers good strength and durability. Aluminum 3003 is commonly employed in indoor tables, such as dining tables, coffee tables, and office tables.
4. Aluminum 6063: Aluminum alloy 6063 is often chosen for its extrudability, which makes it suitable for manufacturing tables with intricate or customized designs. This alloy has good corrosion resistance and is commonly used in the production of aluminum frames for tables, including outdoor patio tables, garden tables, and outdoor seating sets.
5. Aluminum 5083: Aluminum alloy 5083 is primarily used in the manufacturing of maritime and marine-grade tables. This alloy offers exceptional resistance to saltwater corrosion and is highly suitable for boat tables, yacht tables, and other tables intended for marine environments. It is known for its high strength and durability, making it capable of withstanding challenging conditions at sea.
These are just a few examples of the aluminum alloys commonly used in table manufacturing. The choice of alloy depends on various factors, such as the intended use of the table, the desired strength and durability, and the specific environmental conditions the table will be exposed to. Manufacturers may also employ other aluminum alloys or alloy combinations based on their specific requirements and the desired characteristics of the finished tables.
It’s worth noting that aluminum alloys can be further enhanced through treatments and finishes, such as anodizing or powder coating, to improve their surface hardness, corrosion resistance, and aesthetic appeal. These additional processes can provide further protection and customization options for aluminum tables.
editor by CX 2024-04-12
China high quality Laser Cutting Machine Air Compressor One Machine 15kw / 20HP Screw Type Air Compressor for Laser Cutting manufacturer
Product Description
Laser Cutting Machine Air Compressor One Machine 15KW / 20HP Screw Type Air Compressor For Laser Cutting
Main Features:
1. The flexible belt will be automatically tensioned in use. Through adjusting the tension, minimize the loss of pressure and power, to enhance the efficiency of compression.
2. Using the precise spin-oil separator and special two-pole buffer separation, it can minimize the oil consumption, guarantee the outlet gas purity, and extend the lifetime of filter elements.
3. With the toothed V-belt, it has good heat dissipation, long life, higher gear drive and transmission efficiency, as high as over 98%.
Oil Filter: Good Quality filters ensure longer working life and save the maintenance time and cost.
Stainless Steel Hoses: High and low temperature resistant, high pressure resistant.
Compressed Air Vessel: Reduction of pressure drops and energy costs, quality air with low oil content.
Air End: Imported DLOL air end, advanced profile design.
Electric Motor: Premium efficiency Totally TEFC IP54/IP55 motor (Class F insulation) protects against dust and chemicals etc.
Air Filter: Two-stage dust removal and filtering system with efficiency of up to 99.9% even in heavy-duty environment.
Cooler: High quality aluminum material, alternating expression cooler fins, ensure the perfect radiating effect.
Technical parameters:
| Model | 20A/16 |
| Power | 20HP / 15KW |
| Pressure | 1.6MPa / 16bar |
| Air Flow | 1.0m3/min |
| Dimension | 1600*780*1600mm |
| Outlet size | G3/4 |
| Weight | 415KG |
Our workshop:
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Free Spare Parts |
|---|---|
| Warranty: | One Year |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Customization: |
Available
|
|
|---|
.webp)
How are air compressors utilized in pharmaceutical manufacturing?
Air compressors play a crucial role in pharmaceutical manufacturing, where they are utilized for various critical applications. The pharmaceutical industry requires a reliable source of clean and compressed air to ensure the safety, efficiency, and quality of its processes. Here’s an overview of how air compressors are utilized in pharmaceutical manufacturing:
1. Manufacturing Processes:
Air compressors are used in numerous manufacturing processes within the pharmaceutical industry. Compressed air is employed for tasks such as mixing and blending of ingredients, granulation, tablet compression, coating, and encapsulation of pharmaceutical products. The controlled delivery of compressed air facilitates precise and consistent manufacturing processes, ensuring the production of high-quality pharmaceuticals.
2. Instrumentation and Control Systems:
Pharmaceutical manufacturing facilities rely on compressed air for powering instrumentation and control systems. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control temperature and pressure, and automate various processes. The clean and dry nature of compressed air makes it ideal for maintaining the integrity and accuracy of these critical control mechanisms.
3. Packaging and Filling:
Air compressors are employed in pharmaceutical packaging and filling processes. Compressed air is used to power machinery and equipment for bottle cleaning, labeling, capping, and sealing of pharmaceutical products. Compressed air provides the necessary force and precision for efficient and reliable packaging, ensuring product safety and compliance.
4. Cleanroom Environments:
Pharmaceutical manufacturing often takes place in controlled cleanroom environments to prevent contamination and maintain product quality. Air compressors are used to supply clean and filtered compressed air to these cleanrooms, ensuring a controlled and sterile environment for the production of pharmaceuticals. Compressed air is also utilized in cleanroom air showers and air curtains for personnel and material decontamination.
5. Laboratory Applications:
In pharmaceutical laboratories, air compressors are utilized for various applications. Compressed air is used in laboratory instruments, such as gas chromatographs, mass spectrometers, and other analytical equipment. It is also employed in clean air cabinets, fume hoods, and laminar flow benches, providing a controlled and clean environment for testing, analysis, and research.
6. HVAC Systems:
Air compressors are involved in heating, ventilation, and air conditioning (HVAC) systems in pharmaceutical manufacturing facilities. Compressed air powers the operation of HVAC controls, dampers, actuators, and air handling units, ensuring proper air circulation, temperature control, and environmental conditions in various manufacturing areas.
By utilizing air compressors in pharmaceutical manufacturing, the industry can maintain strict quality standards, enhance operational efficiency, and ensure the safety and efficacy of pharmaceutical products.
.webp)
Can air compressors be integrated into automated systems?
Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:
Pneumatic Automation:
Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.
Control and Regulation:
In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.
Sequential Operations:
Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.
Energy Efficiency:
Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.
Monitoring and Diagnostics:
Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.
When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.
In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.
.webp)
What maintenance is required for air compressors?
Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:
1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.
2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.
3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.
4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.
5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.
6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.
7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.
8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.
9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.
10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.
Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.
editor by CX 2024-04-03
China Professional Hot Sell Metal Plate Cutting Machine Exchange Table European Standard for Carbon Steel/Stainless Steel/Aluminium Alloy/Copper/Brass vacuum pump oil near me
Product Description
Fiber Laser Cutting Machine for Plates
with Separate Electric Cabinet and Exchangeable Platform
(3015)
Product Parameters
| Model No. |
AD3015FC |
| Laser Power Cutting Area | 3000X1500mm |
| X/Y Positioning Accuracy | ±0.03mm/m |
| Maximum Movement Speed | 120m/min |
| Maximum Acceleration | 1.0G |
| Power supply | 380V, 50Hz |
| Laser Power | 1500-12000W |
Our Advantages
Sample
Application Scenarios
Sales Service
Quality Management
Packing & Shipment
FAQ
Q: What’s your MOQ and delivery?
A: Our MOQ is 1 set machine.
Q: How about the lead time?
A: It depends on the machine types and models. For example, it will take around 1-2 weeks for welding, cleaning, and marking machines; while it may need 35-50 days for cutting machines.
Q: This is the first time I have used this machine, is it easy to operate?
A: Don’t worry, we will provide customers with videos of using guidance and English user manuals.
If you still have doubts, our customer service team can connect you with our engineer who is available 24/7.
You can reach out to them through WeChat, WhatsApp, Skype, mobile phone, or email to discuss and resolve any issues you may have on time.
Q: Do you provide after-sales service and warranty?
A: Certainly, We ensure a prompt online response within 2 hours to provide warranty services.
We also provide customers with comprehensive manuals for reference.
If any issues persist, you can return the faulty components to us for repair.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 24/7/365 on-Line Service |
|---|---|
| Warranty: | 2 Years Warranty |
| Application: | Home Appliance, Environmental Equipment, Petroleum Machinery Manufacturing, Agriculture Machinery, Textile Machinery, Food Machinery, Aerospace Industry, Automotive Industry, Shoemaking Industry, Woodwork Industry, Advertising Industry, Metal Working Industry |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do I clean and maintain aluminum tables to keep them looking new?
To keep aluminum tables looking new, it is important to clean and maintain them properly. Here is a detailed explanation:
1. Regular Dusting: Start by regularly dusting the surface of the aluminum table using a soft cloth or a feather duster. This helps remove loose dirt, dust, and debris that may accumulate over time.
2. Gentle Cleaning Solution: For general cleaning, create a mild cleaning solution by mixing warm water with a small amount of gentle dish soap or a non-abrasive household cleaner. Avoid using harsh chemicals or abrasive cleaners, as they can damage the aluminum finish.
3. Spot Cleaning: If there are specific stains or spots on the table, you can apply the cleaning solution directly to the affected area. Gently scrub the stain with a soft cloth or a non-abrasive sponge. Rinse the area thoroughly with clean water to remove any residue.
4. Full Surface Cleaning: For a thorough cleaning of the entire table surface, dip a soft cloth or sponge into the cleaning solution and wipe down the aluminum table. Pay attention to all sides of the table, including the legs and any intricate details. Ensure that the cloth or sponge is damp, not soaking wet, to prevent excess water from pooling on the surface.
5. Rinse: After cleaning, rinse the table thoroughly with clean water to remove any remaining soap or cleaning solution. This step is important to prevent any residue from drying on the surface and leaving streaks or marks.
6. Drying: To prevent water spots or marks, dry the aluminum table with a clean, soft cloth or allow it to air dry. If there are any remaining water spots, you can use a microfiber cloth to gently buff the surface and remove them.
7. Protective Coating: If desired, you can apply a protective coating or wax specifically designed for aluminum surfaces. This can help enhance the shine and provide an additional layer of protection against the elements. Follow the manufacturer’s instructions for application and reapplication of the protective coating.
8. Avoid Scratches: To prevent scratches or damage to the aluminum table, avoid using abrasive materials, harsh scrub brushes, or abrasive cleaners. Instead, opt for soft cloths, non-abrasive sponges, or gentle cleaning tools.
9. Avoid Direct Heat: Avoid placing hot pots, pans, or dishes directly on the aluminum table surface, as extreme heat can cause damage or discoloration. Use trivets, coasters, or heat-resistant mats to protect the table from heat sources.
10. Storage: If the aluminum table will not be used for an extended period, it is advisable to store it in a clean and dry location. Ensure it is protected from moisture, extreme temperatures, and direct sunlight. If the table is foldable, follow the manufacturer’s instructions to properly fold and store it.
By following these cleaning and maintenance practices, you can keep your aluminum table looking new and prolong its lifespan. Regular cleaning, gentle handling, and protection against harsh elements will help maintain the appearance and functionality of the table over time.
Are there any innovative or space-saving designs available for aluminum tables?
Yes, there are innovative and space-saving designs available for aluminum tables. Here is a detailed explanation:
1. Folding Tables: Folding aluminum tables are a popular choice for those looking to save space. These tables feature collapsible legs or a hinged top that allows them to be easily folded and stored when not in use. Folding tables are compact and can be conveniently stored in small spaces such as closets, garages, or under beds. They are especially useful for outdoor gatherings, picnics, or camping trips where portability and space efficiency are important.
2. Expandable or Extendable Tables: Some aluminum tables come with innovative mechanisms that allow them to expand or extend their surface area. These tables typically have additional leaves or sections that can be inserted or unfolded to increase the table’s size. By incorporating these expandable features, the table can accommodate more people or provide a larger surface area when needed. When not in use, the additional leaves or sections can be removed or folded back, saving space.
3. Nesting Tables: Nesting tables are a clever space-saving solution that consists of multiple tables of different sizes that can be neatly stacked together. Aluminum nesting tables typically feature a set of two or more tables that can be arranged in various configurations. When not in use, the smaller tables can be nested under the larger ones, occupying minimal space. These tables offer versatility, allowing you to use them individually or as a set, depending on your needs.
4. Convertible Tables: Convertible aluminum tables are designed to serve multiple purposes, maximizing functionality while saving space. These tables can be transformed or adjusted to different configurations or forms to accommodate various activities. For example, some convertible tables can convert from a coffee table height to a dining table height, or from a regular table to a bar table. These versatile designs allow you to optimize space while adapting the table to different functions.
5. Built-in Storage: Some innovative aluminum table designs incorporate built-in storage compartments or shelves. These tables provide a dual-purpose solution by offering a functional tabletop surface and additional storage space. The storage compartments can be used to store items such as outdoor accessories, tableware, or even cushions. By integrating storage into the table design, you can reduce clutter and keep your outdoor space organized.
6. Modular Tables: Modular aluminum tables consist of individual components or modules that can be combined or rearranged to create different table configurations. These tables often feature interchangeable parts, allowing you to customize the table size, shape, or layout according to your specific needs. Modular tables are flexible and adaptable, making them suitable for various outdoor spaces and accommodating different seating arrangements.
7. Space-Saving Designs: In addition to specific features, many aluminum table designs focus on space efficiency as a whole. Tables with sleek and slim profiles, minimalist designs, or cleverly integrated features can help save space in outdoor areas. These designs prioritize functionality while reducing the overall footprint of the table, making them suitable for smaller balconies, patios, or decks.
When searching for innovative or space-saving aluminum tables, consider exploring different furniture brands, designers, or retailers that specialize in smart and compact designs. Read product descriptions, customer reviews, and examine images or diagrams to understand the specific features and space-saving capabilities of the tables.
By opting for these innovative and space-saving designs, you can enjoy the functionality and convenience of aluminum tables while maximizing the use of your outdoor space.
Can aluminum tables be used in indoor settings as well?
Yes, aluminum tables can be used in indoor settings as well. Here is a detailed explanation:
1. Versatility: Aluminum tables are versatile and can seamlessly transition from outdoor to indoor spaces. Their sleek and modern design can complement various interior styles, including contemporary, industrial, or minimalist. Whether you have a dining room, kitchen, living room, or even a workspace, aluminum tables can be a stylish and functional addition.
2. Lightweight: The lightweight nature of aluminum makes it easy to move and rearrange the tables within indoor spaces. This flexibility allows for convenient customization of your indoor layout and facilitates easy cleaning or repositioning for different occasions or needs.
3. Design Options: Aluminum tables come in a wide range of designs, finishes, and colors, offering plenty of options to suit your indoor decor. Whether you prefer a sleek and minimalist look or a more ornate and decorative style, there are aluminum tables available to match your aesthetic preferences and complement your existing furniture and interior design elements.
4. Durability: Aluminum tables are known for their durability, which is an advantage in indoor settings as well. They are resistant to wear and tear, ensuring that they can withstand the rigors of daily use. Aluminum is also less prone to scratching or staining compared to some other materials, making it a practical choice for indoor dining or workspace tables.
5. Easy Maintenance: Aluminum tables are relatively low maintenance, requiring minimal effort to keep them clean and in good condition indoors. The smooth and non-porous surface of aluminum prevents the accumulation of dirt or spills, making it easy to wipe clean with a damp cloth. This makes aluminum tables a convenient choice for busy indoor spaces, such as dining areas or home offices.
6. Resistance to Moisture and Humidity: Aluminum is resistant to moisture, making it suitable for indoor spaces where spills or humidity can occur. Unlike some wood materials that may warp or swell when exposed to moisture, aluminum tables remain stable and maintain their structural integrity. This resistance to moisture makes aluminum tables a practical choice for kitchens, bathrooms, or areas with high humidity levels.
7. Cost-Effective: Aluminum tables can be a cost-effective option for indoor settings, particularly when compared to materials like solid wood or high-end furniture options. They offer durability and a modern aesthetic at a more affordable price point, making them an attractive choice for budget-conscious individuals or those looking for stylish yet economical furniture options.
8. Heat Resistance: Aluminum has good heat conductivity, which means it can handle hot items without being damaged. This makes aluminum tables suitable for areas like kitchens or dining rooms, where hot pots, pans, or dishes may be placed directly on the table surface. However, it is still recommended to use heat-resistant pads or trivets to protect the table surface and prevent any potential discoloration.
In summary, aluminum tables can certainly be used in indoor settings. Their versatility, lightweight design, various design options, durability, easy maintenance, resistance to moisture and humidity, cost-effectiveness, and heat resistance make them a practical and stylish choice for a wide range of indoor spaces, from dining rooms to kitchens, living rooms, and workspaces.
editor by CX 2024-03-28
China factory Portable Lifting Table for Aluminium Frame Installation in Insulating Glass Machine Production vacuum pump distributors
Product Description
Lifting table with separate hydraulic station as the driven force, foot switch for up and down by operator.
Technical parameter
| Power supply | 3P 380V 50HZ |
| Total power | 1.5 kw |
| Platform size | 450×4000mm or customized |
| Max. height of platform | 1035mm |
Mostly asked questions below:
1. What is your soonest lead time?
A: 60 days for whole production line, 30 days for single machine. Special requirement pls check with sales.
2. How do you arrange the shipment?
A: all machines fit GP for sea freight saving. Seaworthy package, workshop container loading, safe arriving.
3. Guarantee ?
A: One-year guarantee (wearing parts are out of this range). Life long service. CHINAMFG will send engineers for service CHINAMFG request onsite.
4. How we can install the machines?
A: Installation included; however, customers need to pay our engineer’s round way air tickets, local transportation and accommodation (hotel and food).
The installation should be finished within 15 days, and will be charged 60USD/engineer/day.
5. How about the after service?
A: Spare parts within 72 hours.
Experienced technical sales sort out most of your questions.
Tens of service engineers ready for on-site service and instruction.
| Type: | Insulating Glass Production Line |
|---|---|
| Certification: | CE |
| Structure: | Vertical |
| Control System: | Foot Switch |
| Condition: | New |
| Lifting Height: | 1035mm |
| Customization: |
Available
|
|
|---|
Can I find aluminum tables with different finishes and surface treatments?
Yes, you can find aluminum tables with different finishes and surface treatments. Here is a detailed explanation:
1. Powder Coating: Powder coating is a common surface treatment for aluminum tables. It involves applying a dry powder to the aluminum surface and then baking it in an oven to create a durable and attractive finish. Powder coating provides a wide range of color options, textures, and finishes, including matte, glossy, or textured surfaces. This treatment enhances the appearance of the table, adds a layer of protection against scratches and corrosion, and can be customized to match various design preferences.
2. Anodizing: Anodizing is another popular surface treatment for aluminum tables. It is an electrochemical process that forms a protective oxide layer on the surface of the aluminum. Anodized aluminum tables have increased corrosion resistance and can be found in different colors, such as silver, bronze, black, or gold. The anodized finish also provides a smooth and sleek appearance while maintaining the natural metallic look of aluminum.
3. Brushed or Satin Finish: Some aluminum tables feature a brushed or satin finish. This finish is achieved by brushing the aluminum surface with abrasive pads or brushes in a unidirectional pattern. The result is a textured and slightly matte appearance that can help mask scratches or fingerprints. Brushed or satin finishes give aluminum tables a contemporary and modern look.
4. Polished Finish: Polished aluminum tables have a highly reflective and mirror-like appearance. This finish is achieved through a polishing process that involves buffing the aluminum surface using abrasive compounds. Polished aluminum tables can add a touch of elegance and sophistication to various settings.
5. Textured or Embossed Surfaces: Some aluminum tables may feature textured or embossed surfaces. These surface treatments create patterns or designs on the aluminum, adding visual interest and a unique aesthetic. Textured or embossed surfaces can range from subtle patterns to more intricate designs, allowing for customization and personalization of the table’s appearance.
6. Woodgrain or Faux Wood Finishes: For those who desire the look of wood but prefer the durability and lightweight nature of aluminum, there are aluminum tables available with woodgrain or faux wood finishes. These finishes mimic the appearance of different wood species, such as oak, teak, or walnut, while retaining the benefits of aluminum, such as weather resistance and low maintenance requirements.
7. Custom Finishes: In addition to the standard finishes mentioned above, some manufacturers offer custom finishes for aluminum tables. This allows customers to choose specific colors, patterns, or textures to match their unique preferences or design requirements. Custom finishes can be particularly useful for commercial settings, events, or projects with specific branding or design considerations.
When looking for aluminum tables with different finishes and surface treatments, it is advisable to check with furniture retailers, outdoor living stores, or manufacturers specializing in aluminum furniture. They can provide a wide range of options to suit various styles, preferences, and functional needs.
In summary, aluminum tables can be found with different finishes and surface treatments, such as powder coating, anodizing, brushed or satin finishes, polished finishes, textured or embossed surfaces, woodgrain or faux wood finishes, and even custom finishes. These options allow for customization and the ability to find an aluminum table that matches your desired aesthetic and design requirements.
Can I find child-friendly aluminum tables for family use?
Yes, you can find child-friendly aluminum tables that are suitable for family use. Here is a detailed explanation:
1. Durable Construction: Child-friendly aluminum tables are designed with durability in mind. Look for tables that are made from high-quality aluminum or aluminum alloy, which is lightweight yet strong. Ensure that the table has a sturdy construction that can withstand the active use and play of children.
2. Safety Features: Child-friendly aluminum tables often come with safety features to minimize the risk of accidents or injuries. Some tables have rounded edges and corners to prevent sharp edges that could potentially harm children. Look for tables with smooth surfaces and no exposed screws or bolts that children could catch their clothing on or get injured by.
3. Stability: Stability is crucial when considering a child-friendly aluminum table. Look for tables with a wide base or legs that provide a stable foundation. Tables with a lower center of gravity are less likely to tip over if children accidentally lean on them or apply pressure. Consider tables with non-slip feet or rubberized leg bottoms to prevent sliding on smooth surfaces.
4. Easy to Clean: Child-friendly aluminum tables should be easy to clean, as children can be messy. Look for tables with a smooth and non-porous surface that can be easily wiped clean with a damp cloth. Avoid tables with intricate designs or patterns that could trap dirt or food particles, making them more challenging to clean.
5. Adjustable Height: Some child-friendly aluminum tables come with adjustable height options, allowing you to customize the table to the appropriate height for your child. This feature ensures that the table is ergonomically suitable for children of different ages and sizes, promoting proper posture and comfort during activities.
6. Colorful and Fun Designs: Child-friendly aluminum tables often feature colorful and fun designs that appeal to children. Look for tables with vibrant colors or patterns that can liven up the play or dining area for your child. Some tables may even have graphics or characters that children find engaging and enjoyable.
7. Optional Features: Depending on your specific needs, you may find child-friendly aluminum tables with additional features. Some tables have built-in storage compartments where children can keep their toys or art supplies. Others may come with attached seating or benches designed specifically for children.
When searching for child-friendly aluminum tables, consider reputable brands or manufacturers that specialize in furniture for children or families. Read product descriptions, customer reviews, and safety certifications to ensure that the table meets safety standards and is suitable for family use.
By considering these factors, you can find child-friendly aluminum tables that provide a safe and enjoyable space for your children to engage in various activities such as eating, playing, drawing, or studying. These tables are designed to withstand the demands of family use while prioritizing the safety and comfort of children.
What are the advantages of lightweight aluminum tables for easy portability?
There are several advantages of lightweight aluminum tables when it comes to easy portability. Here is a detailed explanation:
1. Easy Transportation: The primary advantage of lightweight aluminum tables is that they are easy to transport. Due to their lightweight nature, these tables can be easily lifted, carried, or moved from one location to another without much effort. This makes them highly convenient for situations where frequent table relocation is required, such as outdoor events, picnics, camping trips, or trade shows.
2. Convenience: Lightweight aluminum tables offer a high level of convenience. Their lightness makes it effortless to set up or dismantle the tables, allowing for quick and hassle-free assembly and disassembly. This is particularly beneficial in scenarios where time is a factor, such as when organizing events, parties, or temporary gatherings.
3. Flexibility of Use: The lightweight nature of aluminum tables provides flexibility in their use. They can be easily moved and rearranged within indoor spaces or outdoor settings, allowing for convenient customization of the layout. This flexibility is advantageous when you need to adjust the table arrangement based on the number of guests, the activities taking place, or the available space.
4. Portability for Outdoor Activities: Lightweight aluminum tables are especially useful for outdoor activities. Whether you’re going on a picnic, camping trip, or beach outing, carrying a lightweight table is much more manageable than a heavier alternative. The portability of aluminum tables enables you to enjoy outdoor dining or have a convenient surface for various activities without being burdened by excessive weight.
5. Compact Storage: Another advantage of lightweight aluminum tables is their compactness when it comes to storage. These tables are often designed to be foldable or collapsible, allowing them to occupy minimal space when not in use. This is particularly beneficial in situations where storage space is limited, such as small apartments, RVs, or storage closets.
6. Accessibility: Lightweight aluminum tables are accessible to a wide range of individuals. Their lightness makes them easier to handle for people of different ages and physical abilities. This inclusivity allows everyone to participate in setting up or moving the tables, fostering a sense of independence and involvement.
7. Reduced Risk of Injury: The lightweight nature of aluminum tables contributes to a reduced risk of injury during handling and transportation. Compared to heavier tables made of materials like solid wood or wrought iron, aluminum tables are less likely to cause strain or accidents due to their lighter weight. This makes them a safer option, especially when there are multiple individuals involved in the setup or relocation process.
8. Lower Shipping Costs: Lightweight aluminum tables can also result in lower shipping costs when purchasing or transporting them over long distances. The reduced weight decreases the overall shipping weight, potentially leading to savings in shipping fees or making it more affordable to transport larger quantities of tables.
In summary, the advantages of lightweight aluminum tables for easy portability include easy transportation, convenience, flexibility of use, portability for outdoor activities, compact storage, accessibility, reduced risk of injury, and lower shipping costs. These advantages make lightweight aluminum tables a practical and user-friendly choice for a variety of settings, whether it’s for indoor use, outdoor events, or on-the-go activities.
editor by CX 2023-10-23
China manufacturer 4 Axis CNC Plasma Cutter Table 1530 Metal Pipe CNC Plasma Cutting Machine CNC Aluminum Metal Sheet Plasma Cutting Machine supplier
Product Description
4 Axis CNC Plasma Cutter Table 1530 Metal Pipe CNC Plasma Cutting Machine CNC Aluminum Metal Sheet Plasma Cutting Machine
| Technical Parameters | |
| Model | SKZ-1325/SKZ-1530 |
| Working Area | 1300*2500mm/1500*3000mm |
| Body Structure | Thicker Strong Welded Steel 6 Leds Body |
| X,Y Structure | ZheJiang rack and pinion |
| Y Structure | ZheJiang TBI Ball Screw |
| Rails | ZheJiang CHINAMFG Square Rails |
| Cutting Thickness | 0.1-30mm |
| Max Moving Speed | 80000mm/min |
| Max Cutting Speed | 20000mm/min |
| Power source | LGK 63A 100A 120A 200A Xihu (West Lake) Dis. Plasma Source |
| Operating System | Start LCD visible panel control system |
| Drive Type | Stepper or Servo Motor and Driver |
| Software | Original StarCAM |
| Oil Lubricator | Yes, included |
| Wire Protect | Yes, included |
| Working Dictate | G Code, *uoo, *mmg, *Nc.*plt |
| Running Environment | Temperature: -10ºC~45ºC |
| After packed size | 3.2*2.18*1.75M/1100KGS |
| Package | Export Plywooden Box |
FAQ
Q1: I knew nothing about this machine, what kind of machine i should choose?
Very easy to choose. Just tell us what you want to do by using CNC router, then let us give you perfect solutions and suggestions.
Q2: When I got this machine, but I don’t know how to use it. What should I do?
We will send video and English manual with the machine. If you still have some doubts, we can talk by telephone or and e-mail.
Q3: If some problems happen to this machine during warranty period, what should I do?
We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sales service. So any doubts, just let us know, we will give you solutions.
Q4: Before sending me an inquiry on our cnc router, it is better for you to provide me the following information
1)Your metal or non-metal material size. Because in our factory, we have different models according to working area.
2)Your materials:Metal/Acrylic/plywood/MDF?
3)You want to engrave or cut?
Company Profile
| After-sales Service: | Supply |
|---|---|
| Warranty: | 2 Years |
| Customized: | Customized |
| Layout: | According to Machine |
| Cutting Material: | Copper, Carbon Steel, Iron, Aluminum, Metal Alloy, Stainless Steel |
| Automatic Grade: | Automatic |
| Samples: |
US$ 200/Piece
1 Piece(Min.Order) | |
|---|
What are the ideal sizes and shapes for aluminum tables in different settings?
Choosing the ideal size and shape for aluminum tables depends on the specific setting and intended use. Here is a detailed explanation:
1. Outdoor Dining Areas: In outdoor dining areas, rectangular and round-shaped aluminum tables are commonly used. Rectangular tables offer versatility and can accommodate larger groups, making them suitable for restaurants, cafes, or outdoor events. They provide ample space for dining and can be arranged in long rows or grouped together. Round tables, on the other hand, promote a more intimate dining experience and are suitable for smaller groups or couples. They encourage conversation and are often preferred in outdoor cafes or patio settings.
2. Picnic Areas and Parks: Picnic areas and parks often benefit from larger aluminum tables that can accommodate multiple families or groups. Rectangular tables are popular in these settings as they provide ample seating space and can accommodate picnic baskets, food, and beverages. Additionally, some picnic areas may have designated barbecue grills or cooking facilities, and larger rectangular tables can provide space for food preparation and serving.
3. Rooftop Terraces and Balconies: For rooftop terraces and balconies, smaller-sized aluminum tables are often preferred to optimize space utilization. Square or round tables are ideal for these settings as they can comfortably accommodate a few individuals or couples. The compact size allows for flexibility in arranging the furniture and creating cozy dining areas while maximizing the available space.
4. Poolside and Patio Areas: Poolside and patio areas typically require aluminum tables that are durable and resistant to moisture. Round or square tables are commonly used in these settings. Round tables can facilitate conversation and social interaction, while square tables offer a more structured and symmetrical arrangement. The size of the tables can vary depending on the available space and the number of people expected to use them.
5. Bar and Bistro Settings: Bar and bistro settings often feature tall or counter-height aluminum tables. These tables are designed to accommodate bar stools or high chairs, creating a casual and social atmosphere. Rectangular or square-shaped tables are commonly used, with sizes that allow for comfortable seating and the placement of drinks and appetizers.
6. Outdoor Lounges and Cafes: Outdoor lounges and cafes often employ a combination of different table sizes and shapes to create varied seating options. Along with rectangular and round tables, smaller coffee tables or side tables can be used to accompany lounge chairs or outdoor sofas. This arrangement provides flexibility for guests to enjoy a beverage or snack in a relaxed setting.
7. Event or Conference Spaces: In event or conference spaces, aluminum tables are typically used for seating arrangements, buffet setups, or display purposes. The size and shape of the tables depend on the specific requirements of the event. Rectangular tables are commonly used for banquet-style seating, while round tables encourage interaction and facilitate discussions among participants.
It is important to consider the available space, the number of people to be accommodated, and the desired seating arrangement when determining the ideal size and shape of aluminum tables. By understanding the specific setting and intended use, you can select tables that optimize functionality, promote comfort, and enhance the overall aesthetics of the environment.
How can I secure aluminum tables to prevent them from tipping over in windy conditions?
When it comes to securing aluminum tables to prevent them from tipping over in windy conditions, there are several measures you can take. Here is a detailed explanation:
1. Table Weight and Stability: Choose aluminum tables that are designed with stability in mind. Look for tables with a sturdy construction and a wide base or legs that provide a solid foundation. Heavier tables are generally more resistant to tipping over in windy conditions, so consider selecting tables with a sufficient weight to withstand outdoor gusts. Tables with a lower center of gravity can also offer increased stability.
2. Positioning: Properly positioning the aluminum table can help minimize the risk of tipping over in windy conditions. Place the table in a sheltered area, such as against a wall or under a canopy, where it is less exposed to direct wind. If possible, position the table in a location where it can be shielded by surrounding structures or landscaping features, such as hedges or fences, to reduce the impact of wind.
3. Secure to the Ground: One effective way to secure aluminum tables is by anchoring them to the ground. Depending on the type of surface, there are different methods you can use:
- For grass or soil surfaces, you can use ground stakes or anchors specifically designed for outdoor furniture. These stakes or anchors are driven into the ground next to the table legs and provide additional stability.
- For concrete or paved surfaces, you can use table clamps or brackets that attach the table legs to the ground. These clamps or brackets can be secured using screws or bolts, preventing the table from tipping over.
4. Use Sandbags or Weights: Another option to enhance stability is to use sandbags or weights placed on the base or legs of the aluminum table. Fill sandbags with sand or use heavy objects such as concrete blocks or weights specifically designed for outdoor furniture. Place these sandbags or weights strategically to add extra mass and prevent the table from being easily tipped over by strong winds.
5. Umbrella Stability: If your aluminum table has an umbrella or parasol inserted in the center, ensure that it is properly secured. Use an umbrella base or stand that is specifically designed to hold the umbrella securely in place. Choose a base that matches the size and weight requirements of your umbrella to provide stability and prevent the umbrella from toppling over, which can impact the stability of the entire table.
6. Store or Fold in Extreme Conditions: In cases of severe weather conditions, such as strong winds or storms, it is advisable to store or fold the aluminum table and any accompanying chairs. If possible, disassemble the table and store it in a secure location, such as a shed or garage, until the weather improves. Folding tables can be collapsed and stored in a compact manner. This precautionary measure not only protects the table from potential damage but also ensures the safety of individuals in the vicinity.
Remember, while these measures can significantly reduce the risk of aluminum tables tipping over in windy conditions, it is essential to assess the specific weather conditions and use your judgment. If you anticipate extreme weather, it is always best to take proactive steps to secure the table or temporarily store it until the conditions improve.
Can aluminum tables withstand exposure to the elements in outdoor spaces?
Yes, aluminum tables are well-suited to withstand exposure to the elements in outdoor spaces. Here is a detailed explanation:
1. Corrosion Resistance: One of the key advantages of aluminum tables is their excellent corrosion resistance. Aluminum naturally forms a protective oxide layer on its surface, which helps prevent rust and corrosion. This oxide layer acts as a barrier, shielding the underlying aluminum from moisture, rain, and other environmental factors. As a result, aluminum tables can withstand exposure to rain, humidity, and other outdoor elements without deteriorating or rusting.
2. Weather Resistance: Aluminum tables are designed to be weather-resistant. They can withstand a wide range of weather conditions, including sunlight, heat, cold, and temperature variations. Unlike some other materials that may warp, crack, or fade when exposed to extreme temperatures or sunlight, aluminum maintains its structural integrity and appearance over time. This makes aluminum tables suitable for use in various climates and outdoor environments.
3. UV Stability: Aluminum has good UV stability, meaning it can resist the harmful effects of ultraviolet (UV) rays from the sun. UV rays can cause fading, discoloration, and degradation of materials over time. However, aluminum tables are less susceptible to UV damage, allowing them to retain their color and overall appearance even with prolonged exposure to sunlight. This makes them a durable choice for outdoor spaces where they may be exposed to direct sunlight for extended periods.
4. Non-Reactivity: Aluminum is a non-reactive material, which means it does not easily react or interact with other substances or chemicals in the environment. This property is beneficial for outdoor tables, as they may come into contact with various substances such as water, cleaning agents, food, or beverages. Aluminum tables do not corrode or stain when exposed to these substances, making them easy to clean and maintain in outdoor settings.
5. Low Maintenance: Aluminum tables require minimal maintenance when used in outdoor spaces. Unlike materials like wood, which may need regular sealing or staining to protect them from the elements, aluminum tables typically only require basic cleaning to remove dirt or debris. The inherent durability and resistance of aluminum make it a low-maintenance option for outdoor furniture.
6. Longevity: Aluminum tables have a long lifespan when properly cared for. With their resistance to corrosion, weather, and UV damage, aluminum tables can maintain their functionality and appearance for many years. This durability and longevity make them a cost-effective investment for outdoor spaces, as they can withstand the rigors of outdoor use and provide long-lasting performance.
It’s important to note that while aluminum tables are highly resistant to the elements, their overall durability can also depend on factors such as the quality of construction, finishes, and maintenance practices. It is advisable to follow manufacturer guidelines for care and maintenance to maximize the lifespan and performance of aluminum tables in outdoor spaces.
In summary, aluminum tables are well-equipped to withstand exposure to the elements in outdoor spaces. Their corrosion resistance, weather resistance, UV stability, non-reactivity, low maintenance requirements, and longevity make them a reliable and durable choice for outdoor furniture.
editor by CX 2023-10-20