Product Description
Product Introduction
Kelai tradditional wpc composite decking is made of 60% wood fiber,30%HDPE and 10% additives.
These all material of wpc decking are very friendly.And the wpc decking is anti-slip,anti-uv,crack resistant,anti-corrosion,anti-deformation,heat resistant and anti-mite.However the important thing is that the wpc decking doesn’t need any maintance
Surace of wpc decking:Both side are flat
Product attributes
| Type | Hollow WPC chair lath |
| Technic | Wood Plastic Composite |
| Size | 80*40mm |
| Length | 2.2m/2.9m/3m/4m/as your requirement |
| Model | KS80S40 |
| Delivery Time | 15-20 days after we received the deposit |
| Certification | ISO9001/Intertek/TUV/CE/ISO14001 |
| Application | Garden,Lawn,Balcony,Pool&SPASurrounds,Corridor,Playground Boardwalk,Garage |
Feature
1.Our wpc composite lath is high density,high strength and good looking
2.Our wpc composite lath is non absorbent,effectively prevent the decay and damage
3.Our wpc composite lath advocates environmental protection,back to nature
4.Our wpc composite lath creates beautiful and comfortable land
5.Our wpc composite lath is anti-corrosion,anti-crack,anti-deformation
6.Our wpc composite lath is easy to install and clean
Colors
Application
Storage and Maintenance
1.Pls don’t arbitrarily stack when discharge WPC materials.
2.Because of the possibility of deformation,so Pls don’t verticall discharge, and plslevel on the ground when storage WPC decking.
3.Place on the plane, should prevent the rain, pls use the protective material to cover.In order to get better supporting effect, pls support to the edge when transport wpc decking.
4.When put composite decking on the hard ground, there should have suitable material to underlay atthe bottom, pls pay attention to the cutting ends and don’t have impact phenomenon.
5.Don’t have a hammer and other hard things fall impact,all these may cause WPC decking damaged.
6.When move WPC decking material, we should avoid mutual sliding friction. Move out from the whole stack,and should lift,then place.
7.When install WPC decking, Pls don’t let tools, screws or tools equipment sliding on the decking surface.
8.Avoid wpc decking touch with the building waste.
9.After the scrape, wpc chip contain resin component , so we shouldn’t treat it asburning garbage disposal, pls deliver the debris and other waste materials to factory for recycle, not only it can protect our earth, but it also realize wpc material recycling.
Packing:Covered wpc decking tightly with pallet or bundles or as your requirement
Q: What is the species of wood fiber you use?
A: Eucalyptus, poplar and some mixed wood, which is color related.
Q: What about your main market?
A: The main market is always oversea. More than 90% of the products are for export, and main market is Greece, Czech Republic,
Italy,Germany, Spain, Austria, Swiss, Estonia, Norway, UK, Korea, Thailand, Indonesia, Vietnam, USA, Canada, Argentina,Australia,etc.
Q: Do your WPC products have color fading problem?
A: To be honest, the products do have some color fading problem mostly during the first 6 months after installation, but not obvious.
Q: How many production lines you have? What about the production capacity per month?
A: 14 extrusions lines. 30-35 containers per month.
Q: What properties will you test for your raw material and end products?
A: Wood fiber: ash content, fiber size, water content.
HDPE: melting index, ash content, physical property test for finish product
End product: melting index, ash content, physical property test for finish product
End product: strength test, boiling test and expansion rate test, temperature cycle test, outdoor UV test
Q: What about delivery time for 1 container?
A: 15-20 days CHINAMFG deposit payment well received.
Q:What about the temperature range of your WPC can be used?
A: -40 to 60 degrees.
Q: Have you ever received any complaints from your customers?
A: Frankly speaking, yes. And it’s mainly about color difference, cause our raw material is recycled material, there is always difference between different lots. Now mixing is done for our HDPE plastic and also after pelletizing to well control of this problem.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | Thermal Insulation, Soundproof, Anti-Static, Waterproof, ISO, CE |
|---|---|
| Usage: | Outdoor |
| Type: | Solid WPC Decking |
| Model: | Ks80s40 |
| Surface: | Flat |
| Size: | 80*40mm |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
What are the advantages of using teak wood for garden furniture?
Teak wood is a popular choice for garden furniture due to its numerous advantages. Here are some key advantages of using teak wood for your garden furniture:
1. Natural Durability:
Teak wood is naturally durable and known for its exceptional strength and resistance to outdoor elements. It contains natural oils that act as a protective barrier against moisture, pests, and rot. These properties make teak wood highly suitable for outdoor use, as it can withstand exposure to rain, sun, and fluctuating temperatures.
2. Weather Resistance:
Teak wood’s natural oils also contribute to its excellent weather resistance. It is highly resistant to warping, cracking, and splitting, even when exposed to harsh weather conditions. This makes teak wood an ideal choice for garden furniture that needs to withstand the elements year-round.
3. Low Maintenance:
Teak wood requires minimal maintenance compared to other types of wood. Its natural oils help preserve the wood’s integrity and protect it from moisture damage, reducing the need for frequent sealing or staining. Simply cleaning the furniture periodically with mild soap and water is usually sufficient to maintain its appearance.
4. Longevity:
Teak wood is renowned for its longevity. When properly cared for, teak furniture can last for many years, often outlasting other types of outdoor furniture materials. Its durability and resistance to decay make it a long-term investment for your garden.
5. Aesthetic Appeal:
Teak wood has a beautiful natural golden hue that weathers to an attractive silver-gray patina over time. Many people appreciate the warm and timeless appearance of teak furniture, which can enhance the aesthetic appeal of any garden or outdoor space.
6. Versatility:
Teak wood’s versatility is another advantage. It can be easily crafted into various furniture designs, ranging from classic to contemporary styles. Whether you prefer traditional or modern aesthetics, teak furniture can complement a wide range of outdoor settings and personal preferences.
7. Sustainable and Eco-Friendly:
Teak wood is often sourced from sustainable plantations and is considered an eco-friendly choice for furniture. Well-managed teak plantations ensure the replenishment of trees and promote responsible forestry practices.
8. Investment Value:
Teak furniture is often regarded as an investment due to its durability and longevity. While the initial cost of teak furniture may be higher compared to some other materials, its longevity and minimal maintenance requirements can make it a cost-effective choice in the long run.
These advantages make teak wood a highly desirable option for garden furniture. Its natural durability, weather resistance, low maintenance, longevity, aesthetic appeal, versatility, sustainability, and investment value combine to create a compelling choice for outdoor furniture that can withstand the test of time.
What are the best materials for garden furniture frames that are rust-resistant?
When it comes to selecting garden furniture frames that are rust-resistant, several materials are known for their durability and ability to withstand outdoor conditions. Choosing the right material for your garden furniture can help ensure its longevity and minimize maintenance. Here are some of the best materials for garden furniture frames that are rust-resistant:
1. Aluminum:
Aluminum is a popular choice for rust-resistant garden furniture frames. It is lightweight, durable, and does not rust. Aluminum frames are typically powder-coated or anodized to provide additional protection against corrosion. Powder coating involves applying a protective layer of colored powder that bonds to the metal surface, while anodizing creates a protective oxide layer. Aluminum frames are low maintenance and can withstand various weather conditions.
2. Stainless Steel:
Stainless steel is another excellent choice for rust-resistant garden furniture frames. It is highly resistant to corrosion and can withstand exposure to moisture and harsh outdoor environments. Stainless steel frames are strong and durable, making them suitable for heavy use. However, it’s important to note that low-quality stainless steel or stainless steel with a low chromium content may still be prone to rust, so it’s essential to choose high-quality stainless steel furniture.
3. Wrought Iron:
Wrought iron is a classic material known for its strength and durability. It is typically coated with a protective finish, such as powder coating or paint, to prevent rust. Proper maintenance, including periodic touch-ups and sealing any chips or scratches in the finish, can help maintain the rust resistance of wrought iron frames. Wrought iron furniture adds a timeless and elegant look to garden spaces.
4. Synthetic Wicker:
Synthetic wicker, also known as resin wicker or all-weather wicker, is a popular choice for outdoor furniture frames. It is made from synthetic materials, such as high-density polyethylene (HDPE), that are resistant to rust and other forms of corrosion. Synthetic wicker furniture is lightweight, easy to maintain, and can withstand exposure to various weather conditions. It is often paired with aluminum frames for added durability.
5. Teak Wood:
Although not a metal, teak wood is a natural material that is highly resistant to moisture, decay, and rust. Teak furniture frames are an excellent choice for outdoor use due to their inherent durability. Teak wood contains natural oils that protect it from rot and corrosion. However, teak furniture requires regular maintenance, such as cleaning and periodic application of teak oil, to maintain its appearance and prevent graying.
6. Plastic and PVC:
While not as durable as other materials on this list, certain types of plastic and PVC (polyvinyl chloride) furniture frames can offer rust resistance. Plastic and PVC frames are lightweight, affordable, and require minimal maintenance. Look for high-quality plastic or PVC furniture that is specifically designed for outdoor use and resistant to UV radiation and fading.
When choosing rust-resistant garden furniture frames, consider factors such as durability, maintenance requirements, and overall aesthetic appeal. It’s also important to note that while these materials are rust-resistant, proper care and maintenance still play a crucial role in prolonging the lifespan of your garden furniture.
How can I protect my garden furniture from the elements during the winter?
Protecting your garden furniture from the harsh winter elements is essential to prolong its lifespan and keep it in good condition. Here are several steps you can take to protect your furniture:
1. Clean and Dry:
Before winter arrives, thoroughly clean your garden furniture to remove any dirt, leaves, or debris. Allow it to dry completely to prevent the growth of mold or mildew during storage.
2. Store Indoors:
If possible, store your garden furniture indoors during the winter months. A garage, shed, or basement can provide protection from the elements. This is the most effective way to safeguard your furniture from extreme cold, moisture, and snow.
3. Use Furniture Covers:
If indoor storage is not possible, use weatherproof furniture covers to protect your outdoor furniture. Choose covers made from durable materials that are designed to withstand winter conditions. Ensure that the covers are secure and provide full coverage for each piece of furniture.
4. Elevate and Protect:
If you cannot store your furniture indoors and it is not practical to cover each piece, elevate the furniture off the ground to prevent contact with wet or frozen surfaces. You can use wooden pallets or furniture risers for this purpose. Additionally, consider using waterproof tarps or plastic sheets to provide temporary protection from rain or snow.
5. Remove Cushions and Upholstery:
If your furniture has removable cushions or upholstery, it’s advisable to store them indoors during the winter. This will prevent them from becoming damp, stained, or damaged by freezing temperatures. Clean and dry the cushions before storing them to maintain their condition.
6. Apply Protective Coatings:
Before winter sets in, consider applying protective coatings to your wooden or metal furniture. For wooden furniture, use an outdoor furniture oil or sealant to protect it from moisture and prevent cracking or warping. Metal furniture can benefit from a coat of rust-resistant paint or a protective spray.
7. Regular Maintenance:
Throughout the winter, periodically check on your stored or covered furniture and ensure that the covers are in good condition. Remove any accumulated snow or debris to prevent damage. If necessary, reapply protective coatings or make repairs to maintain the furniture’s integrity.
By following these steps, you can effectively protect your garden furniture from the winter elements and ensure its longevity. Remember, proper storage, covers, and maintenance are key to keeping your furniture in excellent condition for many seasons to come.
editor by CX 2024-04-09